Español
Inogen One® G5® / Inogen® Rove 6 External Battery Charger
$342.00
-
-
Official external desktop charger for Inogen One G5 & Inogen Rove 6 batteries
-
Fast turnaround: charge a spare while you use the concentrator
-
Works with both batteries: 8-cell (standard) & 16-cell (BA-516 extended)
-
Status LEDs show charging/ready at a glance
-
Worldwide input 100–240 V AC (travel-friendly; use plug adapter as needed)
-
Protects battery health with OEM charging profile & safety circuits
In stock
Inogen G5 / Rove 6 External Charger (BA-503)
Keep moving with continuous power rotation. The Inogen BA-503 External Battery Charger lets you recharge a spare G5/Rove 6 battery off-device while your concentrator stays in use. Drop the battery into the desktop dock, check the status LEDs, and you’ll always have a fresh pack ready for errands, flights, or long days out.
Built to Inogen’s OEM specs, the charger uses a battery-optimized charge profile and integrated protections to support battery longevity. Compact, quiet, and 100–240 V compatible, it’s ideal for home, office, and travel.
Compatibility: For Inogen One G5 and Inogen Rove 6 batteries only (8-cell & BA-516 16-cell). Not for G3/G4.
What’s Included
-
1 × Inogen G5 / Rove 6 External Charger
-
1 × AC power supply brick + USA/North America power cord
(Batteries sold separately.)
Charging Times (typical)
| Battery Type | Capacity | Approx. Charge Time (BA-503) |
|---|---|---|
| Standard | 8-cell (G5/Rove 6) | ~2–3 hours |
| Extended | 16-cell BA-516 | ~4 hours |
Times vary with temperature, battery age, and initial state of charge.
Why Use an External Charger?
-
Zero downtime: use one battery while the other charges off-device
-
Faster turnarounds vs. charging through the concentrator (especially for BA-516)
-
Preserves device runtime: the concentrator isn’t tied to an outlet
-
OEM safety: correct voltage/current, over-temp and over-current protections
How to Use (Quick Start)
-
Place the BA-503 on a hard, ventilated surface.
-
Connect the AC adapter to the charger and wall outlet (100–240 V).
-
Insert the battery (label facing outward) until it seats firmly.
-
LEDs indicate charging and solid/green when complete.
-
Remove the battery and store or install it in your G5/Rove 6.
Notes: Do not cover the charger. Avoid extreme heat/cold. Use OEM Inogen batteries and power supplies.
Specifications (at a glance)
| Feature | Detail |
|---|---|
| Model / MPN | BA-503 |
| Input | 100–240 VAC, 50/60 Hz (global voltage) |
| Output | OEM-matched charging profile for G5/Rove 6 batteries |
| Indicators | LEDs for charging / full |
| Supported Packs | 8-cell & 16-cell (BA-516) |
| Safety | Over-current / over-voltage / thermal protection |
| Use Environment | Indoor, ventilated surface; quiet operation |
| Compatibility | Inogen One G5 & Inogen Rove 6 batteries |
| Not Compatible | Inogen G3/G4 batteries or other brands |
FAQs
1) Will this charge the BA-516 extended battery?
Yes. Expect about ~4 hours from low to full.
2) Can I charge one battery externally while using another in my device?
Exactly—that’s the main advantage for continuous rotation and minimal downtime.
3) Is it safe to leave the battery on the charger overnight?
The charger includes safety shut-off/maintenance logic. For longevity, remove the battery after it reaches full.
4) Can I use this outside the U.S.?
Yes. 100–240 V input works worldwide. Use the correct plug adapter for local outlets.
5) Does this work with G3 or G4 batteries?
No. The BA-503 is designed for G5/Rove 6 batteries only.
